![]()
The first wet season is a useful point to compare a newly installed combiner box with its handover condition. Water marks, damaged seals, corrosion or cable-entry changes can become easier to notice after real weather exposure. The review should establish evidence and a responsible response, not assume that every symptom has the same cause.
Plan the inspection with the maintenance provider. External observations and document checks can inform the work, while internal access and electrical testing belong with qualified personnel following the site’s safety arrangements.
Bring the handover baseline to the visit
Collect the as-built drawing, enclosure and gland specifications, installation instructions, photographs and outstanding installation items. Identify the exact box and circuits. Without a baseline, it can be difficult to distinguish original workmanship from later damage or an unrecorded modification.
Record recent weather and any relevant site events, such as roof repairs or nearby construction. They provide context, not automatic proof of causation. A leak seen after heavy rain may involve an entry, a seal, condensation or something outside the enclosure; the evidence must support the diagnosis.
Make sure the maintenance team can reach the equipment safely. A review postponed repeatedly because access was never arranged is not an effective weather check.
Look at the installed enclosure as a system
An enclosure rating is not independent of its cable entries, closures and installation. Review visible damage, loose or unsupported external cables, missing entry closures and changes to the surrounding drainage or mounting arrangement. Compare the installation with its approved documentation.
Do not solve an apparent moisture problem by casually adding holes, vents or sealant. Such changes can affect the enclosure arrangement and require manufacturer and project review. The aim of the first visit is to identify the condition and determine an approved repair.
IEA-PVPS guidance on operation and maintenance discusses climatic stresses and the inspection of electrical panels, corrosion and entry points. That supports a planned review, but it does not establish one inspection interval or repair method for every location.
Keep observation separate from explanation
Consider an illustrative box where a technician finds a water mark near an entry after several storms. The first record should describe the position, extent, date and associated condition, supported by photographs obtained under the authorised inspection procedure.
“Rain entered through a defective gland” is a later conclusion requiring evidence. If the gland was replaced before anyone recorded the condition, the opportunity to distinguish a component issue from cable routing, workmanship or another source may be lost.
The same applies to discolouration or corrosion. Record the affected part and whether comparable equipment shows a similar condition. Avoid turning a single finding into a claim that an entire product family has failed.
Check electrical consequences through the service team
The qualified maintenance provider should decide which electrical checks are needed from the actual findings and equipment instructions. A dry-looking outer surface does not establish that internal components are unaffected. Conversely, an exterior mark alone does not prove an electrical fault.
Different boxes also contain different functions. BENY’s catalogue distinguishes isolator boxes, DC/AC combiner options and AC combiners; BENY’s combiner solution range covers several project applications. Confirm the installed arrangement before assuming what devices are inside or which circuits a service action affects.
Opening one isolator should not be treated as proof that every part is de-energised. The approved source identification and isolation procedure remain necessary for the task.
Close the finding and update the next review
Assign each issue an action owner, target date and closure evidence. That evidence might include an approved repair record, updated drawing or service test result, depending on the finding. Keep unresolved items visible rather than ending the report with an unexplained “satisfactory”.
Use the results to inform the next maintenance review. The site may need closer observation of a particular entry or no change beyond its normal programme. Either decision should follow the evidence.
The first wet-season review is valuable because it connects the purchased enclosure to its real installation. A documented comparison gives the owner a clearer basis for corrective work than either an IP label alone or an unsupported guess about where the moisture came from.